Indesit KP9F96S(X)/EX S Mode d'emploi télécharger pdf (Page 8)

Make sure that the hose and gaskets comply with current

national legislation. To begin using the hose, remove the

hose holder on the appliance (the gas supply inlet on the



! Perform the connection in such a way that the hose length

does not exceed a maximum of 2 metres, making sure that

the hose is not compressed and does not come into contact

with moving parts.

Checking the connection for leaks

When the installation process is complete, check the hose



Adapting to different types of gas

It is possible to adapt the appliance to a type of gas other

than the default type (this is indicated on the rating label

on the cover).

Adapting the hob

Replacing the nozzles for the hob

burners:

1. Remove the hob grids and slide

the burners off their seats.

2. Unscrew the nozzles using a 7



replace them with nozzles suited to

the new type of gas (see Burner and



3. Replace all the components by following the above

instructions in reverse.



1. Turn the tap to the minimum position.

2. Remove the knob and adjust the regulatory screw, which



small but steady.

! If the appliance is connected to a liquid gas supply, the

regulatory screw must be fastened as tightly as possible.

3. While the burner is alight, quickly change the position of

the knob from minimum to maximum and vice versa several



! The hob burners do not require primary air adjustment.

! After adjusting the appliance so it may be used with a

different type of gas, replace the old rating label with a

new one which corresponds to the new type of gas (these

labels are available from Authorised Technical Assistance

Centres).

! Should the gas pressure used be different (or vary slightly)

from the recommended pressure, a suitable pressure regulator

      

national regulations relating to “regulators for channelled gas”.

Safety Chain

! In order to prevent the appliance from overturning

accidentally, for example in case of a child climbing onto

the oven door, the safety chains MUST be installed!

The cooker is provided with safety chains that must be





on the appliance.

           

cooker, as shown in the drawing, in such way to be tight



! When the installation process is complete, the chains must

be kept in tension!

TABLE OF CHARACTERISTICS

Afmetingen

Oven

HxLxP

32,9 x 59,5 x 39,4 cm

Volume

lt. 78

Voltage and

frequency

230V~ 50Hz (see data plate)

Power supply Max 2850W

ENERGY

LABEL

Directive 2002/40/EC on the label of

electric ovens.

Standard EN 50304-60350

Energy consumption for

Natural convection – heating

mode: Convection mode

Declared energy consumption for

Forced convection Class –

heating mode: Fan assisted.

This appliance conforms to the following

European Economic Community

directives:

- 2006/95/EEC dated 12/12/06 (Low

Voltage) and subsequent amendments

- 2004/108/EEC dated 15/12/04

(Electromagnetic Compatibility) and

subsequent amendments

- 93/68/EEC dated 22/07/93 and

subsequent amendments.

- 2009/142/EEC dated 30/11/09 (Gas)

and subsequent amendments.

- 2012/19/EEC and subsequent

amendments.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Commentaires sur ces manuels

Pas de commentaire

Indesit KP9F96S(X)/EX S Mode d'emploi Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Indesit KP9F96S(X)/EX S