Indesit KN3G21(X)/UA Mode d'emploi télécharger pdf (Page 7)

Adapting the grill

Replacing the grill burner nozzle:

1. Remove the oven burner after loosening screw V

(see  gure).

2. Unscrew the grill burner

nozzle using a special nozzle

socket spanner (see  gure) or

preferably with a 7 mm socket

spanner, and replace it with a

new nozzle that is suited to the

new type of gas (see Burner and

nozzle speci cations table).

! Be careful of the spark plug

wires and the thermocouple

tubes.

! The oven and grill burners

do not require primary air

adjustment.

! After adjusting the appliance so it may be used with

a different type of gas, replace the old rating label with

a new one that corresponds to the new type of gas

(these labels are available from Authorised Technical

Assistance Centres).

! Should the gas pressure used be different (or vary

slightly) from the recommended pressure, a suitable

pressure regulator must be fitted to the inlet hose in

accordance with current national regulations relating to

“regulators for channelled gas”.

Table of burner and nozzle specifications

S

R

A

We recommend cleaning the oven before using it for the

first time, following the instructions provided in the „Care

and maintenance” section.

KN3G21/UA

TECHNICAL DATA

Oven dimensions

(HxWxD)

34x39x44 cm

Volume

58 l

Useful

measurements

relating to the oven

compartment

width 42 cm

depth 44 cm

height 17 cm

Power supply voltage

and frequency

see data plate

Burners

may be adapted for use with any

type of gas shown on the data

plate, which is located inside the

flap or, after the oven

compartment has been opened,

on the left-hand wall inside the

oven.

EC Directives: 2006/95/EC dated

12/12/06 (Low Voltage) and

subsequent amendments -

2004/108/EC dated 15/12/04

(Electromagnetic Compatibility)

and subsequent amendments -

2009/142/EC dated 30/11/09

(Gas) and subsequent

amendments - 93/68/EEC dated

22/07/93 and subsequent

amendments - 2002/96/EC.

1275/2008 (Stand-by/ Off mode)

Table 1 Liquid Gas Natural Gas

Burner Diameter

(mm)

Thermal Power

kW (p.c.s.*)

By-Pass

1/100

Nozzle

1/100

Flow*

g/h

Nozzle

1/100

Flow*

l/h

Nozzle

1/100

Flow*

l/h

Nominal Reduced (mm) (mm) *** ** (mm) (mm)

Fast

(Large)(R)

100 3.00 0.7 41 87 218 214 128 286 143 286

Semi Fast

(Medium)(S)

75 1.90 0.4 30 70 138 136 104 181 118 181

Auxiliary

(Small)(A)

51 1.00 0.4 30 52 73 71 76 95 80 95

Oven - 2.80 1.0 46 80 204 200 119 267 132 257

Grill - 2.30 - - 75 167 164 114 219 139 227

Supply

Pressures

Nominal (mbar)

Minimum (mbar)

Maximum (mbar)

28-30

6,5

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Indesit KN3G21(X)/UA Mode d'emploi Page 7

Commentaires sur ces manuels

Produits connexes et manuels pour Plaques chauffantes Indesit KN3G21(X)/UA